Description
LUK® DMF185 Clutch Flywheel
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
PRODUCT ATTRIBUTE & INFO
| Crank Hole Dia. (inch) | – | 0.4016 |
|---|---|---|
| Crank Hole Dia. (mm) | – | 10.2 |
| Overall Casting O.D. (inch) | – | 12.6063 |
| Overall Casting O.D. (mm) | – | 320.2 |
| Centering diameter / dowel hole (inch) | – | 11.0236 |
| Centering diameter / dowel hole (mm) | – | 280 |
| Dowel Hole Pattern | – | 5 |
| Dowel hole diameter (inch) | – | 0.2362 |
| Dowel hole diameter (mm) | – | 6 |
| Flywheel Friction Surface Inner diameter (inch) | – | 6.0827 |
| Flywheel Friction Surface Inner diameter (mm) | – | 154.5 |
| Ring Gear To Friction Surface (inch) | – | 1.0748 |
| Ring Gear To Friction Surface (mm) | – | 27.3 |
| Ring Gear Thickness (inch) | – | 0.3937 |
| Ring Gear Thickness (mm) | – | 10 |
| Number of teeth, starter ring gear | – | 125 |
| Crank To Friction Surface (inch) | – | 1.748 |
| Crank To Friction Surface (mm) | – | 44.4 |
| Flywheel Thickness [mm] (inch) | – | 2.6142 |
| Flywheel Thickness [mm] (mm) | – | 66.4 |
| Bolt hole PCD clutch pres.plte (inch) | – | 11.0236 |
| Bolt hole PCD clutch pres.plte (mm) | – | 280 |
| Cup depth, secondary flywheel (inch) | – | 0.2835 |
| Cup depth, secondary flywheel (mm) | – | 7.2 |
| Flywheel friction surface outer diameter (inch) | – | 9.8425 |
| Flywheel friction surface outer diameter (mm) | – | 250 |
| I.D. for Pilot (inch) | – | 1.0394 |
| I.D. for Pilot (mm) | – | 26.4 |
| Ring Gear Major Dia. (inch) | – | 12.5 |
| Ring Gear Major Dia. (mm) | – | 317.5 |
| Bolt hole PCD crankshaft (inch) | – | 2.5984 |
| Bolt hole PCD crankshaft (mm) | – | 66 |
| Torque Capacity DMFW (inch) | – | 15.3543 |
| Torque Capacity DMFW (mm) | – | 390 |
| Ring Gear Mounting O.D. (inch) | – | 11.2894 |
| Ring Gear Mounting O.D. (mm) | – | 286.75 |
| Bolt Hole Pattern | – | 21 |
Reviews
There are no reviews yet.